Skip to content

Services

Every heat-treatment step under one roof. Tell us what you need and we will highlight the right services.

01 Induction Hardening Induction surface hardening from 20 to 500 kW in Gebze: a hard surface and tough core on shafts, gears and wear zones, with low distortion.
02 Tempering Tempering for hardened steel parts: relieves internal stresses, restores toughness and sets the hardness to the value on your drawing.
03 Vacuum Hardening Vacuum hardening for tool, die and martensitic stainless steels: a clean surface with no oxidation or decarburisation, and low distortion.
04 Normalising Normalising for forged, rolled, cast and welded steel parts: turns a coarse, uneven structure into a uniform, fine-grained one.
05 Quenching and Tempering Quenching and tempering: hardening followed by high-temperature tempering for high strength and toughness in steels such as 42CrMo4 and C45.
06 Case Hardening (Carburising) Carburising, hardening and tempering for a wear-resistant 45–65 HRC surface and an impact-resistant tough core on gears and shafts.
07 Nitriding Nitriding: nitrogen diffusion gives a hard surface resistant to wear and fatigue, with no quenching and low distortion; for alloy and tool steels.
08 Straightening Straightening shafts, bars and long parts that bent during heat treatment back to the straightness and run-out tolerance on the drawing.
09 Stress Relieving Stress relieving to reduce residual stresses from machining, cutting and welding, lowering the risk of distortion in later stages.
10 Grinding Surface, cylindrical and internal grinding after heat treatment, for precise dimensions and surface finish on hardened parts.
11 Carburising Carburising low-carbon steels: carbon diffused into the surface gives a hard, wear-resistant case and a tough core after hardening.
12 Quality Control Hardness and case depth inspection after heat treatment: we confirm the part meets the values on the drawing before it is delivered.
13 Heat Treatment Induction heat treatment by scanning, single shot, lift and rotate, rotary table and longitudinal transfer, hardening only the zone required.
14 Inductor Manufacturing Design and manufacture of water-cooled copper induction coils (inductors) shaped to your part and to the zone to be hardened.

Get a quote for your part

Tell us the service, the material and the hardness you need, and attach your technical drawing. We will prepare your quote and get back to you.

Request a quote 0262 644 16 53

Message us on WhatsApp